4T65E-HD transmission pan bolt torque values
#2
10 lb/ft according to TechInfo
http://www.bonnevilleclub.com/forum/...=article&k=107
I did mine a tad tighter, it felt so weak.
http://www.bonnevilleclub.com/forum/...=article&k=107
I did mine a tad tighter, it felt so weak.
#7
Junior Member
Thread Starter
I'll definitely do them in a step pattern. Probably will go 144 in lbs. That'* only 2 lbs. over spec.
I can't believe how much fluid I got out! Drained for 16 hours and got out about 8 quarts.
I can't believe how much fluid I got out! Drained for 16 hours and got out about 8 quarts.
#10
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
I did both the van and car, The van took a good 6 quarts, the car took 7 or more quarts, but I pulled the shift modulator on the car and rebuilt that. The van has a small leak now, so when the weathers good I'll be going over that again.