2000-2005 Discuss your 2000-2005 Bonneville SE, SLE, and SSEi Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Sticking throttle

Thread Tools
 
Search this Thread
 
Old 02-17-2008, 10:38 PM
  #1  
Junior Member
Thread Starter
 
TylerW's Avatar
 
Join Date: Feb 2008
Location: Guntersville,AL
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
TylerW is on a distinguished road
Default Sticking throttle

Hey guys:

I did a search and couldn't come up with anything specific to the issue I'm having.

Several times a week, the throttle on my car sticks in the closed position. It only happens after it'* sat for about 30 minutes to an hour after being driven a while.

It takes a hard tap on the pedal to break it free, then it works fine, no sticking in any other position.

Does this sound like time for a throttle body cleaning? I bought this car used so I don't know it'* history.

'02 Bonneville SE N/A, 121k.

Thanks
Old 02-17-2008, 10:59 PM
  #2  
Senior Member
Posts like a Camaro
 
Bonnevillan's Avatar
 
Join Date: Nov 2007
Location: MN
Posts: 1,172
Likes: 0
Received 0 Likes on 0 Posts
Bonnevillan is on a distinguished road
Default

the throttle body should probably be cleaned, but i would most likely look at the pedal assembly itself or the cables if it'* sticking that hard.
Old 02-18-2008, 11:23 AM
  #3  
Senior Member
Posts like a Northstar
 
*B2*'s Avatar
 
Join Date: Mar 2007
Location: Illinois
Posts: 691
Likes: 0
Received 1 Like on 1 Post
*B2* is on a distinguished road
Default

Clean the throttle body. You will be amazed at how much crap is built up in there. Your pedal will be smooth and free afterwards.
Old 02-19-2008, 07:40 PM
  #4  
Senior Member
Posts like a Northstar
 
whitecrystal1's Avatar
 
Join Date: Sep 2006
Location: Dumfries, Virginia Member: #6887
Posts: 577
Likes: 0
Received 0 Likes on 0 Posts
whitecrystal1 is on a distinguished road
Default

Yes clean it, but don't do like I did and remove the throttle plate to try to make it easier to clean. I couldn't get it realigned and mine started to stick afterwords I ended up buying a complete used throttle body off ebay to fix my f-up.
Old 02-19-2008, 07:46 PM
  #5  
Senior Member
Posts like a Northstar
 
imidazol's Avatar
 
Join Date: Sep 2005
Location: Dayton, OH
Posts: 600
Likes: 0
Received 1 Like on 1 Post
imidazol is on a distinguished road
Default

How do you recommend cleaning the gunk off the side of the throttlebody?

Remove the honeycomb, spray cleaner inside, use a cloth on a wooden stick?

Or remove the throttlebody and clean and then replace the gasket between the throttlebody and the UIM?

I've had the sticking he describes. It can be pretty brittle feeling at times. I cleaned mine on the car with air intake cleaner from CRC. But ayear later the sticking has returned occasionally.
Old 02-19-2008, 07:49 PM
  #6  
Senior Member
Posts like a Northstar
 
whitecrystal1's Avatar
 
Join Date: Sep 2006
Location: Dumfries, Virginia Member: #6887
Posts: 577
Likes: 0
Received 0 Likes on 0 Posts
whitecrystal1 is on a distinguished road
Default

Here you go
http://www.bonnevilleclub.com/forum/...e=article&k=64
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bonnie2K
2000-2005
2
07-15-2012 04:29 AM
KeithH
1992-1999
0
12-27-2008 05:36 PM
whitecrystal1
1992-1999
7
04-29-2007 02:29 PM
Bob Dillon
1992-1999
1
04-10-2005 10:28 AM
DeeGee96SE
Performance, Brainstorming & Tuning
5
06-29-2004 12:21 AM



Quick Reply: Sticking throttle



All times are GMT -4. The time now is 06:14 PM.