super charger
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2006
Location: wisconsin
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
super charger
Hello everyone........I was wondering what is the number for the belt that goes around the supercharger pully also what are the other 2 pulleys next to the super charger called because today the pulley right nest to the supercharger pully was making a loud noise and when I was driving today I noticed that I had no boost and when I fot home the belt was gone and the pulley right next to it was missing the plastic wheel.
So now I have to replace that pulley and get a new belt,also what is the part number for that pulley and do I need any special tool to get it off to replace it?
Thanx for any help.
Also I noticed that my chugging going up hills has gone away now that the sc is no longer working drives real smooth now!
So now I have to replace that pulley and get a new belt,also what is the part number for that pulley and do I need any special tool to get it off to replace it?
Thanx for any help.
Also I noticed that my chugging going up hills has gone away now that the sc is no longer working drives real smooth now!
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2006
Location: wisconsin
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
thank you very much for your quick response and for putting up the pic for me awesome!!!!!!
Sorry for the type o'*....also is there any special tool to remove that pulley?It is the number 3 you have posted that is missing the plastic wheel and I spun all the rest and they all spin axcept that #3 pulley on the pic you posted.
again thanx much very helpfull.
also I would like to know how come my chugging going into boost has been eliminated since the */c is no longer working or should I start a new thread?
Sorry for the type o'*....also is there any special tool to remove that pulley?It is the number 3 you have posted that is missing the plastic wheel and I spun all the rest and they all spin axcept that #3 pulley on the pic you posted.
again thanx much very helpfull.
also I would like to know how come my chugging going into boost has been eliminated since the */c is no longer working or should I start a new thread?
#4
RIP
True Car Nut
If it'* the supercharger tensioner pulley, you need a torx bit, either a T50 or T47...I don't recall if that is the one that takes the strange size of T47 or not. It is also reverse threaded.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2006
Location: wisconsin
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Thank you very much again and again you guys rock for the info I need!!!!!
Now if I could just get the local G.M. shop to be so helpfull....ha ha ha!!!!
Now if I could just get the local G.M. shop to be so helpfull....ha ha ha!!!!
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2006
Location: wisconsin
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
well it is the hole sh*t and capudal not just the pulley thanx for the wink it made me think before I wasted alot of time and energy just replacing the pulley thanx for looking out much appreciated
From what dayco'* website says I can purchase it (the tensioner) at my local advanced auto parts store.
Now to figure out how difficult it is to replace the whole thing(tensioner)!
From what dayco'* website says I can purchase it (the tensioner) at my local advanced auto parts store.
Now to figure out how difficult it is to replace the whole thing(tensioner)!
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by Hans
the pulleys are usually available from any parts house....the tensioner is not.
Thread
Thread Starter
Forum
Replies
Last Post
Bassplayincrowe
Your Ride: GM Pictures & Videos
9
08-09-2003 10:29 PM
jdschlieve
Performance, Brainstorming & Tuning
1
12-31-1969 07:00 PM