so i was wondering, do they make aftermarket headlights and tail lights for a 2002 bonneville sle. and i dont mean stock ones you can buy i mean the cool aftermarket ones

nope, gotta make them yourself if you want them

how do i make them?

you can retrofit projectors, there are a few threads around here on that, and you can't really make euro tails which is probably what you are talking about for the premade ones, you can take the orange pieces out of the tails and headlights and tint them but it could be illegal to do the tint and remove the orange reflectors

Tinting them is about the easiest thing you can do to make them "custom" and stand out.

Otherwise, like mentioned.. you have to custom make your own.

Mine have Acura TSX projectors and Audi led light strips. To fit the projector I popped the refractor out and cut off the entire low beam side, sanded what was left on low-beam side (can't cut it exact because of aiming hardware), and sprayed it black. It'* not hard to do but can be a bit of a PITA. When its done though let me tell ya, it stands out. Just the headlights give the front end a pretty BA look.

ok thankyou is it easy to install the led light strip?

You have to pull the headlight apart, if you were clearing them then you could do that at the same time

so you pull it apart and it just sits on the inside? how do you make them clear? just take out the orange reflectors?

When you have it apart you take the black frame part out and the amber will pop right out. It'* held in by three tabs. As for the projectors they don't just sit inside. Mine are held in by three longs bolts through the back of the housing.