replacing front turn signal bulb
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2006
Location: Winnipeg, Manitoba 2000 Dark Metallic Red SSEi
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
replacing front turn signal bulb
awefully embarrased to ask this question...um...but whats the easiest way to replace the front turn signal bulb? Drivers side.
There'* no way I can get my hand down there to grab the socket and looks like there'* a lot of weird stuff to unbolt to just get a little better access to the socket. I replaced the headlight bulb yesterday after ripping up my hands trying to pull it'* socket out, but there'* no way I can reach the turn signal bulb socket.
There'* no way I can get my hand down there to grab the socket and looks like there'* a lot of weird stuff to unbolt to just get a little better access to the socket. I replaced the headlight bulb yesterday after ripping up my hands trying to pull it'* socket out, but there'* no way I can reach the turn signal bulb socket.
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
you have to remove the 2 10mm bolts that hold the HL in, and then pull the HL out of the "Ball and Socket" attachment in the fender. Grab HL and Pull straight forward, and it will pop out
#3
Junior Member
Posts like a Ricer Type-R
Join Date: Nov 2007
Location: Pullman, WA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Also an excellent time to clear your corners while your in there. Did mine when I had to change my first bulb out, only added about 1-1.5 hours to the task while watching TV.
Thread
Thread Starter
Forum
Replies
Last Post
GunsOfNavarone
Bonneville GXP/ Northstar Powered Cars
9
04-01-2012 04:52 PM