Evap problem
#1
Member
Posts like a V-Tak
Thread Starter
Evap problem
Does anybody have a diagram for the evap system for around the fuel tank area?
A couple years ago I deleted the codes for the evap system and pulled/plugged the solenoid and line in the engine bay. I was under the car sealing an exhaust leak the other day and decided to pull the charcoal canister and capped the lines.
As you can guess its a pita to now fill the gas tank. I see there are 3 lines that went to the canister. 1 3/8 size going to the engine bay and 2 1'' or bigger going to the tank.
Im kinda of confused on which one of the bigger hoses to open back up or both?
Thanks, Jay
A couple years ago I deleted the codes for the evap system and pulled/plugged the solenoid and line in the engine bay. I was under the car sealing an exhaust leak the other day and decided to pull the charcoal canister and capped the lines.
As you can guess its a pita to now fill the gas tank. I see there are 3 lines that went to the canister. 1 3/8 size going to the engine bay and 2 1'' or bigger going to the tank.
Im kinda of confused on which one of the bigger hoses to open back up or both?
Thanks, Jay
#2
Senior Member
True Car Nut
here is the diagram the service manual gives, does say sizes but the one that comes up in the middle is it. i wouldnt just leave it open either it will spit gas when the tank is semi full to full
(1) EVAP Canister Purge Solenoid
(2) EVAP Canister
(3) Fuel Fill Neck/Fill Cap
(4) Rollover Valve/Fuel Tank Pressure (FTP) Sensor
(5) Fuel Tank
(6) EVAP Canister Vent Solenoid
(7) Vent Hose/Pipe
( EVAP Vapor Pipe
(9) EVAP Purge Pipe
(10) EVAP Service Port
(1) EVAP Canister Purge Solenoid
(2) EVAP Canister
(3) Fuel Fill Neck/Fill Cap
(4) Rollover Valve/Fuel Tank Pressure (FTP) Sensor
(5) Fuel Tank
(6) EVAP Canister Vent Solenoid
(7) Vent Hose/Pipe
( EVAP Vapor Pipe
(9) EVAP Purge Pipe
(10) EVAP Service Port
The following users liked this post:
jayd435 (03-02-2014)
Thread
Thread Starter
Forum
Replies
Last Post