PCV location on my 03?
can anyone tell me where the pcv is located at, i looked all over the valve cover area and cant find it, thanks
|
The PCV is located on top of the supercharger towards the drivers rear of the S/C. It is under a little plate that has 2 bolts holding it down. The plate actually (atleast on my SSEi) has PCV stamped into it.
What makes you think that you need to replace it? Or are you just figuring out where everything is? |
Originally Posted by swartlkk
The PCV is located on top of the supercharger towards the drivers rear of the S/C. It is under a little plate that has 2 bolts holding it down. The plate actually (atleast on my SSEi) has PCV stamped into it.
What makes you think that you need to replace it? Or are you just figuring out where everything is? |
Originally Posted by chasmanz28
Originally Posted by swartlkk
The PCV is located on top of the supercharger towards the drivers rear of the S/C. It is under a little plate that has 2 bolts holding it down. The plate actually (atleast on my SSEi) has PCV stamped into it.
What makes you think that you need to replace it? Or are you just figuring out where everything is? |
:oops: heres a question to make most feel a lot more smarter..and incase you were lookin for a laugh today....hope to brightin you day :) what is a PVC?? and where is it located on my02 SE?? http://forums.tccoa.com/images/smilies/gotsearch.gif <--- i know i know... ill go do that 2.....
*EDIT* alrite i did my search.... didnt help me.. i dunno im retarted... anyone have a pic of where it is??? :) thanks guys!! |
PCV = Positive Crankcase Ventilation. It is supposed to keep pressure from building up in the crankcase.
I don't know if I would just be replacing things because you have reached 20k miles... I'm at close to 40k and I know for a fact that the PCV hasn't been changed and I'm not worried one bit about it. There are signs that let you know that the PCV is going bad or has gone bad. One of them is excessive oil consumption. When there is pressure in the crankcase, more oil will be forced into the cylinders via the rings and should be noticeable in your routine fluid level checks (if you have a routine). Personally, I check all of the fluids once a week to make sure that they are all topped off. If anything has changed (that shouldn't have), I take note of it in a log that I keep. It's the best way to notice problems before they become major issues. Typically, the PCV is located in a valve cover and has a hose that runs to engine vacuum. I believe that with the L67, it is connected via internal passages to both crankcase & intake (engine vacuum). I do not know where it is on an S2 N/A... Sorry. |
Yes, someone please help. I change my PCV valve in every car I've had at least once a year. So, I don't want any lectures about the "evils of changing a PCV valve". What I would appreciate knowing is where the PCV valve is located on my 2000 SE. I have a factory service manual and there is NOTHING in it about a PCV valve. Someone please help.
|
Originally Posted by LBingman
Yes, someone please help. I change my PCV valve in every car I've had at least once a year. So, I don't want any lectures about the "evils of changing a PCV valve". What I would appreciate knowing is where the PCV valve is located on my 2000 SE. I have a factory service manual and there is NOTHING in it about a PCV valve. Someone please help.
I'm just letting others know that just because you replace it every year, it doesn't require changing ANY WHERE near that often so other's don't waste thier time and money. |
Man do I like GOOGLE!!! Simple search for "L36 PCV" netted me this:
L36 PCV Replacement Here's another one for the L67: L67 PCV Replacement Hot damn. There's the answer to your question. Took me less than 30 seconds from search start to this post! |
Originally Posted by LBingman
Yes, someone please help. I change my PCV valve in every car I've had at least once a year. So, I don't want any lectures about the "evils of changing a PCV valve". What I would appreciate knowing is where the PCV valve is located on my 2000 SE. I have a factory service manual and there is NOTHING in it about a PCV valve. Someone please help.
swart..you're so smart!! i never thought of google to find that out!! :) your a live saver!! and now im best friends with google all over again! :wink: |
All times are GMT -4. The time now is 05:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands