new headlight bulbs
 

Does the whole headlight assembly have to be removed to install new bulbs - mine is a 2003 Booneville.

Thanks

Yes, Remove the two 10mm hex head fasteners on the headlamp. Use gentle force to bring the whole headlamp assembly straight ahead forward in order to disengage the ball stud from the socket. This will give clear access to relamp.

It maybe a bit tough pulling the headlight assembly forward the ball stud gets a bit dry. Put a dab of petroleum jelly on it before putting it back in to help with the next time.
What brand of light are you installing?

Based on earlier advice, Siverstars were recommended. I also assume both high and low beam should be done. Does Silverstar make bulbs for the fog lights?

Thanks for all the help.

Yes they make fog lights #880, hard to find though? They're always out when I go looking :?

Thanks again - I will go shopping tomorrow.

Just installed the new Silverstars - what an improvement!

Thanks again for the help.

Anytime cutlass442, do you have any pics? or access to a digital camera, I like to see up north guys :wink:

I do have access to a digital camera but I am not sure how to post pictures?

The images have to be on the web, try www.cardomain.com and set up an account, or www.photobucket.com

Lets see those pics