Help Removing my headlight assembly.
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2009
Location: Indiana
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Help Removing my headlight assembly.
I took off the 2 front clips, and i heard you had to take off these too screws with are really long, they both look like they need allen wrenches to take be taken out.
So i tried using allen wrenches, i got it a lil bit up, but none of mine really fit them correctly without some wiggle room.
Cliffnotes: How do i take out these darn screw type things circled in picture.
Also looked at older posts about people clearing their headlights using the search button, and alot of the links people post on write ups, i get a 403 Forbidden when i click it, and i really want to view them, it would make this way easier.
So i tried using allen wrenches, i got it a lil bit up, but none of mine really fit them correctly without some wiggle room.
Cliffnotes: How do i take out these darn screw type things circled in picture.
Also looked at older posts about people clearing their headlights using the search button, and alot of the links people post on write ups, i get a 403 Forbidden when i click it, and i really want to view them, it would make this way easier.
Last edited by Bwayney; 08-24-2009 at 10:51 AM.
#2
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
the bolts i circled in yellow are the bolts to remove the headlight housings, the ones you have circled are the aiming screws and lense clips
#3
-- SITE DONATOR --
True Car Nut
I've got the same setup (03 SSEI). Once you remove the bolts he circled in yellow, there is one harness to disconnect towards the right of the assembly (assuming you are in front of the car), that harness feeds all the lights and is the only one you have to disconnect. Then there is a piece that will pop out when pulled with the right amount of force. Be sure to pull straight out on the assembly though, so as to not snap this locking piece.
Thread
Thread Starter
Forum
Replies
Last Post
DeathDealer
General GM Chat
2
11-13-2011 11:47 PM