check engine light
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: corning
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
check engine light
so i have been looking at getting a 01 ssei and i test drove it today. the check engine light was on abs and trac off lights were on. he said the check engine just came on and its the evap sensor. also when i drove it when ya turned the wheel it make a slight click noise and felt like it was right at the steering wheel. at idel the boost read about -8. also the oil pressure was pegged. it has 72000miles and they want 7grand outside is in great shape minus one very minor dent and some pait flaking from front valance. interior is in great shape has all the goodies leather sunroof HUD ect. what do you guys think?
#2
Senior Member
Posts like a Turbo
Join Date: Sep 2007
Location: Saginaw, MI
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Being that I see and work on these vehicles daily, my honest opinion is to look elswhere. Why would you want to spend 7G'* on someone elses problem car. Sounds like it has a LOT of issues. And it can get EXPENSIVE quick. Evap components are usualy avaliable only from the dealer are are rarely on the cheap side. The ABS and Trac systems are tied together and will usually trip both lights when there is a code present. Wheel bearing are the most common failure to cause the ABS and Trac lights to come on. A bad wheel bearing can also cause a clicking noise when you turn. I have heard a couple of them do that. I personally wouldn't spend that kind of money on a vehicle with all those inherited issues
#3
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Bloomington, MN
Posts: 3,693
Likes: 0
Received 0 Likes
on
0 Posts
the click you heard sounds like the common intermediate shaft issue
http://www.bonnevilleclub.com/forum/...=41677&start=0
you can use the issues to talk down the price, or have them fix it
http://www.bonnevilleclub.com/forum/...=41677&start=0
you can use the issues to talk down the price, or have them fix it
#4
RIP
True Car Nut
The clunking as you turn, as Golden Bullet said is likely the intermediate steering shaft. Lubing often takes care of it for a while. Or a new, redesigned one can be purchased. The procedure is in techinfo.
The oil pressure being pegged is likely a bad oil pressure sensor.
I agree that the wheel speed sensor is the most likely cause of the abs and traction control light. The dealer, or a well equipped shop should be able to pull a code for you.
I wouldn't be as quick to toss it aside because of these issues. There is nothing unusual in the list, and if you do the work yourself (none of it is very hard), it should be $300 to fix, with the hub being the most expensive.
The oil pressure being pegged is likely a bad oil pressure sensor.
I agree that the wheel speed sensor is the most likely cause of the abs and traction control light. The dealer, or a well equipped shop should be able to pull a code for you.
I wouldn't be as quick to toss it aside because of these issues. There is nothing unusual in the list, and if you do the work yourself (none of it is very hard), it should be $300 to fix, with the hub being the most expensive.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
I don't agree with Dude..
Is the place willing to reset the gas cap (typical evap issue on these cars) and look into teh wheel bearing?
Beyond the intermediate shaft...you are probably looking at $130 in parts to replace the bearing.
Is the place willing to reset the gas cap (typical evap issue on these cars) and look into teh wheel bearing?
Beyond the intermediate shaft...you are probably looking at $130 in parts to replace the bearing.
#6
RIP
True Car Nut
I forgot about the evap issue. Many times that has turned out to be the evap vent solenoid, near the back wheel. Taking it off, cleaning, lubing, and reinstalling often clears up the problem.
Thread
Thread Starter
Forum
Replies
Last Post
RWW2003
1992-1999
10
11-13-2009 07:00 AM
MissRockstar04
2000-2005
9
07-07-2009 04:12 PM
erics95se
1992-1999
11
04-08-2006 12:40 PM