power window
#1
Junior Member
Thread Starter
Join Date: Jun 2007
Location: Shawinigan, Quebec,Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
power window
my power windows ,power-lock/mirror stop to run,,,,,,,,,only in driver door is correct,,
what happen??
its a ssei 2001
thanks
what happen??
its a ssei 2001
thanks
#3
Junior Member
Join Date: Aug 2005
Location: North of Buffalo, NY *** NEBF '05, '06, '07 *** ***ONBF & NYBF 06; 07*** ***WCBF 06***
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Please clarify...you have power to windows/mirror on the drivers door only? No power to the passenger front and both rears?
If the fuses check out okay, you may have what I did... corrosion on the main bus/hub. I'm not sure where it is located though - dealer fixed it for me. It'* my understanding that the power is supplied to the drivers door...then that hub distributes it to the other three doors from there. :?:
If the fuses check out okay, you may have what I did... corrosion on the main bus/hub. I'm not sure where it is located though - dealer fixed it for me. It'* my understanding that the power is supplied to the drivers door...then that hub distributes it to the other three doors from there. :?:
#4
Junior Member
Posts like a Ricer Type-R
Join Date: Jan 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Making other windows work....
I just bought my bonnie and had the same problem. Only the driver side door worked. We get water into our cars, one way or another, this water has no way to exit on our vehicles. It sits in the bottom of our floor pans. The master switch provides a serial data line to the driver'* door module. The drivers door module then provides this data to all the other window modules (one per door). The splice for this "data" line is under the driver side seat. You'll need to pull the drivers seat out. Pull the carpeting on this side of the vehicle up. Under there I am sure you will find water in the padding and such. There is a wiring channel that runs under the driver seat, towards the center console. You'll need to remove this upper lid of the wiring channel, and look for a tan/white wire. There is a small section of the wire covered in electrical tape, and splits into a total of 4 wires. Inside the electrical tape is a metal splce which has become corroded and needs repairs. Strip the wires back until you get to clean line on each of them, and reconnect all the wires, and weather seal them. This will take care of your problem. You can try the driver side door module (located inside the door panel in the upper right corner) but it is 250 from the dealer, and 150 from a scrap yard. I would try this first, it is the most likely cause, and the cheapest fix.
Raviaan
Raviaan
#5
Junior Member
Thread Starter
Join Date: Jun 2007
Location: Shawinigan, Quebec,Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
thanks raviaan i will try this......
but just to be sure ,,,,, my 2 rear power windows with power lock stop to run and then a week later ,the front passenger side window stop with power lock and mirror (+defrost in mirror)
but just to be sure ,,,,, my 2 rear power windows with power lock stop to run and then a week later ,the front passenger side window stop with power lock and mirror (+defrost in mirror)
#7
Senior Member
Posts like a Northstar
Join Date: Feb 2007
Location: Starbuck, Manitoba Drving the Batmobile
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Not to be a prude but when you're typing so people understand what you're saying, grammer check what you wrote before you post
ie. "my 2 rear power windows with power lock stop to run"
should say
""my 2 rear power windows with power lock, stopped running""
and
"the front passenger side window stop with power lock and mirror (+defrost in mirror)"
should read
""the front passenger side window with power lock and mirror (+defrost in mirror) also stopped working""
much more easier to understand
ie. "my 2 rear power windows with power lock stop to run"
should say
""my 2 rear power windows with power lock, stopped running""
and
"the front passenger side window stop with power lock and mirror (+defrost in mirror)"
should read
""the front passenger side window with power lock and mirror (+defrost in mirror) also stopped working""
much more easier to understand
#10
Junior Member
Thread Starter
Join Date: Jun 2007
Location: Shawinigan, Quebec,Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Yes Archon for reading i'm ok,,,, its just for typing ,
I will try to fix it under the driver seat this weekend.
And yes i come from Quebec , Canada
I will try to fix it under the driver seat this weekend.
And yes i come from Quebec , Canada