How would I remove this bolt? (pic)
https://i115.photobucket.com/albums/...E/DSCN0327.jpg
I've always wanted to remove the air filter box to clean underneath it, but have never been able to because of this bolt. It's a Torx head and it's in a real tight spot. If it were a Allen head, then I would just cut the end of a Allen key to get in there; I've done that before for Allen heads in a tight spot. But this thing is a Torx head; there's no cutting the end of a Torx key because they're only machined on the end. If I ever do get it out, I want to replace it with an Allen head bolt. If I ever get it out that is. ;) |
Carefully remove lower the air cleaner assembly (1) by pulling the assembly from the 2 rubber grommets in the engine compartment |
Originally Posted by PontiacDad
Carefully remove lower the air cleaner assembly (1) by pulling the assembly from the 2 rubber grommets in the engine compartment |
Originally Posted by PontiacDad
You dont need to remove the bolt just pull.
|
No those are support posts and just pull off the rubber grommets. Give it a tug.
|
All times are GMT -4. The time now is 02:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands