intake plenum
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Sep 2004
Location: The Bluegrass State
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
intake plenum
Hey gang, I am needing a intake plenum, mine is warped and aint gonna last much longer.
I used to have a good list of where to get stuff, but when my puter died so did my list.
I looked around at intense and EdMoradParts, and didn't have a whole lotta luck. So any info you could give would be appreciated.
Thanks,
BTW I just replace the UIM gaskets like last week, when I get another plenum will I need to replace those again??
Tim
I used to have a good list of where to get stuff, but when my puter died so did my list.
I looked around at intense and EdMoradParts, and didn't have a whole lotta luck. So any info you could give would be appreciated.
Thanks,
BTW I just replace the UIM gaskets like last week, when I get another plenum will I need to replace those again??
Tim
#3
Go to GM Intake Manifold Kit - iNeedParts.com
They have the Plenums
Or plug the lim and fill he uim coolant race with JB weld, then forget about it.
Learned this on this forum.
Regards,
James
They have the Plenums
Or plug the lim and fill he uim coolant race with JB weld, then forget about it.
Learned this on this forum.
Regards,
James
#4
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Sep 2004
Location: The Bluegrass State
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies and the link. I had never heard of this site before. That is probably the one I will go with, I looked at ZZP and the one they sold didn't have everything this one does so that is the one I will get.
Thanks again
Tim
Thanks again
Tim
Thread
Thread Starter
Forum
Replies
Last Post
Performance, Brainstorming & Tuning
10
09-28-2005 11:12 AM