thermostat bolt
#3
Senior Member
Posts like a Camaro
Join Date: Apr 2006
Location: maitland fl
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
how much of the bolt is protruding? any of it?
if you have any showing, hit it with pb blaster and crank it out with one of these.
http://www.harborfreight.com/cpi/cta...emnumber=94640
if you have any showing, hit it with pb blaster and crank it out with one of these.
http://www.harborfreight.com/cpi/cta...emnumber=94640
#8
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Nov 2004
Location: Portage, Michigan
Posts: 1,134
Likes: 0
Received 0 Likes
on
0 Posts
no it wasnt a knock against anybody on here, i just know that Ive bragged several times to my friends about the fast replys from this site when a problem comes up. So sometimes Im shocked when a post goes untouched and i was alittle ticked after snapping the both off.
But no biggy though, sarcastic humor is usually how i talk though and its not to offend any of you guys. but we can lock this one up,I used some channel locks to twist the screw out and found another 1/2" bolt to replace it and she was as good as new.
But no biggy though, sarcastic humor is usually how i talk though and its not to offend any of you guys. but we can lock this one up,I used some channel locks to twist the screw out and found another 1/2" bolt to replace it and she was as good as new.