rear load leveling sys - airline replacement
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2006
Location: south central PA
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
rear load leveling sys - airline replacement
The other day I had a rear wheel off and noticed one of my shock airlines is about worn through, at the edge of the fender lining (about 6" from the shock). Probably a common problem. It measured to be about 1/8" O.D., which is a size tubing I can get. GM price for the replacement kit (both sides, rear, was $52).
Does anyone know if the fittings at the shock and pump can be re-used with replacement bulk airline? There is a big 90 elbow at the shock end - I haven't removed the compressor shield to see what'* at the other end yet.
Does anyone know if the fittings at the shock and pump can be re-used with replacement bulk airline? There is a big 90 elbow at the shock end - I haven't removed the compressor shield to see what'* at the other end yet.
#2
Senior Member
True Car Nut
Join Date: Oct 2002
Location: Groton, CT _NEBF 05, 06, 07_
Posts: 2,703
Likes: 0
Received 0 Likes
on
0 Posts
I should think you can get that tubing and appropriate fittings in bulk at Pep Boys, Autozone or one of those type places for less $ than what a GM dealer would take from you.
Thread
Thread Starter
Forum
Replies
Last Post