air ride issue
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jan 2010
Location: FLINT, MICHIGAN
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
air ride issue
once again 01 bonneville
where can i get oem air lines and shocks...
the rear shocks were replaced with what autozone said were stock air shocks from gabriel. but in the package it says their for an 85 truck.... these shocks werent meant for lower pressures such as the ones for luxury air ride cars min psi is like 30psi
i was told the pump dont build up enough pressure for them. and thats why someone ran separate air lines to a valve like on trucks where you air them up with a compressor
where can i get oem air lines and shocks...
the rear shocks were replaced with what autozone said were stock air shocks from gabriel. but in the package it says their for an 85 truck.... these shocks werent meant for lower pressures such as the ones for luxury air ride cars min psi is like 30psi
i was told the pump dont build up enough pressure for them. and thats why someone ran separate air lines to a valve like on trucks where you air them up with a compressor
#2
Senior Member
True Car Nut
Join Date: Jan 2009
Location: Dover, NH
Posts: 7,122
Likes: 0
Received 0 Likes
on
0 Posts
ya go with monroe max airs MA822 is the part # they come in pairs the gabriel'* are junk also check your height sensor in the driver side left rear wheel well disconect the linkage on it and let it spring up in about 10 seconds after that you should hear the compressor kick on the car has to be on for it to work air lines are either junk yard or Oem
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jan 2010
Location: FLINT, MICHIGAN
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
compressor lines to shocks were cut ovr a yr ago so when there was a load in trunk an no one added air the pump still comes on to this day i just need new line all the way to the pump its only $11 for new oem kit ACDELCO Part # PK097 {Kit reconnects shocks to auto leveling system #88985665} i hope it comes with the fittings for the ends....thats been the problem mostly i cant find factory connectors for the lines
Thread
Thread Starter
Forum
Replies
Last Post