'01 SSEi Lower A-frame bushings
Has anyone ever replaced these? In replacing wheel bearings, I had to put some muscle into lostening a few bolts and while doing so, I noticed a good bit of play in these busihings. Apparently, that's the rattle that I've been hearing when I go over bumps! I have been trying to figure that out!
Anyway, I'm wondering if the bushings have to be pressed in. If so, you'd have to take the entire A-Frame off of the car. If they slide in and out with the tap of a hammer, I think this project is one I can tackle myself. Any advice would be greatly appreciated. |
According to the 2000 FSM, the lower control arm bushings are not serviceable. The assembly must be replaced.
|
You've got to be kidding me! That part's got to cost an outrageous amount of money! I can't understand why the bushings can't be replaced. I found the parts for a 01-03 on e-bay. Are you sure?
|
Originally Posted by hal brodmann
(Post 1379357)
You've got to be kidding me! That part's got to cost an outrageous amount of money! I can't understand why the bushings can't be replaced. I found the parts for a 01-03 on e-bay. Are you sure?
GM Parts - GM Auto Parts - GM Parts House USA |
All times are GMT -4. The time now is 10:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands