94 bonne cam/crank ecm? Help please!
09-07-2006, 10:35 AM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2006
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
94 bonne cam/crank ecm? Help please!
Been having trouble with my bonne lately. It'll rev/sputter every now and then and I noticed the rpms were jumping around a little. I pulled the codes and it came back with cam and crank position sensors bad. I had the mechanic replace the cam, but the code is still coming up. I had them check it out again and they seem stumped by the intermittancy of the service engine soon light. They aren't giving me a direct answer. The mech said it'* most likely the ECM but didn't seem too sure. I'm tired of wasting money when the mechanic doesn't know what he'* talking about.. PLEASE HELP. I need my car to work!!
09-07-2006, 10:40 AM
#2
Guest
Posts: n/a
Do you have any idea what the codes were ?
94-95 did have some puter issues, but lets get all the info we can from you first and see what direction we can go in
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
94-95 did have some puter issues, but lets get all the info we can from you first and see what direction we can go in
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
09-07-2006, 11:00 AM
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2006
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
No I don't know what they were exactly. That'* what I heard twice from the mechanic. cam crank error and cam sensor error, 341 and 342.. if that makes sense???
09-07-2006, 11:15 AM
#4
Guest
Posts: n/a
Originally Posted by t_j303
No I don't know what they were exactly. That'* what I heard twice from the mechanic. cam crank error and cam sensor error, 341 and 342.. if that makes sense???
The P0342 Is a Cam Signal Circuit problem
I wonder if you by chance had a code P1350 or P01361 which would be the ignition control circuit...
Where are you located?
Also is this a 94 SE, SSE, SSEi ?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
09-07-2006, 11:32 AM
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Jr'*.. wasn't the 94 one of the years where the cam magnet (located on the cam gear inside) was known to come out of that gear, causing a loss of signal.
09-07-2006, 11:57 AM
#7
Guest
Posts: n/a
Originally Posted by BillBoost37
Jr'*.. wasn't the 94 one of the years where the cam magnet (located on the cam gear inside) was known to come out of that gear, causing a loss of signal.
If the magnet said its good byes, the SES would be on all of the time...
I'll assume that the SES is still on?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
