1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

Taking off imblums..

Thread Tools
 
Search this Thread
 
Old 11-23-2002, 05:37 AM
  #1  
Senior Member
Certified GM nut
Thread Starter
 
BonneAlien's Avatar
 
Join Date: Sep 2002
Posts: 2,204
Likes: 0
Received 0 Likes on 0 Posts
BonneAlien is on a distinguished road
Default Taking off imblums..

Hey i want to take the " Bonneville " Patch off of my trunk. I heard they are just glued on..but how would i go about taking them off and not chipping paint or distorting anything?
Old 11-23-2002, 11:45 AM
  #2  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Not glued, but there'* an adhesive foam pad between the emblem and the car. Tricky taking them off. Warm them up with a blow dryer, then carefully start prying on it, working all the way around. Make sure you use a soft rag at the leverage points!

Then just use some rubbing alcohol on a rag to clean up the leftover adhesive.
Old 11-23-2002, 01:46 PM
  #3  
Senior Member
Certified GM nut
Thread Starter
 
BonneAlien's Avatar
 
Join Date: Sep 2002
Posts: 2,204
Likes: 0
Received 0 Likes on 0 Posts
BonneAlien is on a distinguished road
Default

are there any side affects? Do you think the paint could have warped underneath there the past couple years? So i just heat it up with a blow dryer and start pulling it off with a wet towel?
Old 11-23-2002, 01:47 PM
  #4  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Not a wet towel. You want to keep it warm. I can't gaurantee what your paint looks like underneath. You're at least going to need to use polishing compound when you're done.
Old 11-23-2002, 11:26 PM
  #5  
Senior Member
Posts like a 4 Banger
 
BUCKMAN's Avatar
 
Join Date: Oct 2002
Location: Siler City N.C.
Posts: 124
Likes: 0
Received 0 Likes on 0 Posts
BUCKMAN is on a distinguished road
Default

My humble but honest opinion is leave it on. With the lighter collar paints you might end up with a two tone deck lid. as the paint underneath hasn't faded as much as the rest of your car.
Old 11-25-2002, 12:30 AM
  #6  
Senior Member
Certified GM nut
Thread Starter
 
BonneAlien's Avatar
 
Join Date: Sep 2002
Posts: 2,204
Likes: 0
Received 0 Likes on 0 Posts
BonneAlien is on a distinguished road
Default

Damn, i was hoping you guys wouldn't talk me out of it. What if i were to take them off and if it looked back i'd paint the imblum chrome or something. What type of epoxy or whatever would i use to put them back on? Would it be efficient?
Old 11-25-2002, 01:09 AM
  #7  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

3M body and trim tape. Gray color, with red backing strip. Local body shop. Put it on the back and trim it up, then peel off the backing and stick it on. Won't go anywhere. That'* the stuff they use for ventshades. I use the same tape to hold 2 aftermarket cupholders to my center console. One on each side. They hold Big Gulps at .75 G'*.
Old 11-25-2002, 02:08 AM
  #8  
Senior Member
Posts like a 4 Banger
 
CNY2000SE's Avatar
 
Join Date: Oct 2002
Location: Yorkville, NY
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
CNY2000SE is on a distinguished road
Default

Originally Posted by BonneAlien
are there any side affects? Do you think the paint could have warped underneath there the past couple years? So i just heat it up with a blow dryer and start pulling it off with a wet towel?
Actually, I read somewhere that you should heat the emblem with a blow dryer and then use dental floss to slowly work the badges off.

But again, I think removing the badge would look like merde if you did it on an older car, due to the fading factor.
Old 11-25-2002, 12:56 PM
  #9  
Senior Member
Certified GM nut
 
95BonnevilleSESC's Avatar
 
Join Date: Aug 2002
Location: Kalamazoo, MI
Posts: 1,839
Likes: 0
Received 0 Likes on 0 Posts
95BonnevilleSESC is on a distinguished road
Default

There is a medical product called "Detachall" that you can purchase from any home healthcare store (the places that sell Oxygen to people who have emphazeema (sp?) and wheelchairs to those who need them. It is used to remove surgical tape from skin. It is safe for paint and it is very effective in removing adhesives (I use it to remove those pesky automotive dealer decals and stickons form any car I buy). It is less than $5.00 and a little goes a long way. There may be other products with different names--the home medical companies will be able to help you if you describe it as an adhesive remover for surgical tape.

As for removing your badging, you will notice that the paint under the emblems has not faded. There is no getting around this. over time, it will fade enough to ALMOST match the rest of your paint.

I am a purist, I wouldn't remove them unless I were shaving the whole vehicle--which is very unlikely.

Hope this helps.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DaveSac11789
1992-1999
6
09-09-2006 01:34 AM
ssesc93
1992-1999
13
05-23-2005 10:51 PM
chasmanz28
Audio (and aftermarket electronics)
2
03-15-2005 11:55 PM
ssesc93
1992-1999
2
06-26-2003 02:37 PM



Quick Reply: Taking off imblums..



All times are GMT -4. The time now is 09:36 AM.