96SE PVC VALVE Where is it?
#2
Senior Member
Certified GM nut
PVC
Looking at the engine its located in the far left of the plastic intake.
Its just below the three wire map sensor.
Unplug the sensor.
Take a large slip joint plyer on the outside and gently turn it to release the cover.
Be careful not to crack it.
The map sensor will come off and use a long needle nose to pull out the PCV valve.
Its just below the three wire map sensor.
Unplug the sensor.
Take a large slip joint plyer on the outside and gently turn it to release the cover.
Be careful not to crack it.
The map sensor will come off and use a long needle nose to pull out the PCV valve.
Thread
Thread Starter
Forum
Replies
Last Post