I always wondered why my i saw this display on dash
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Posts: 7,262
Likes: 0
Received 0 Likes
on
0 Posts
I always wondered why my i saw this display on dash
My tail lamp light is on teh DIC and i never understood why and all of my tail lamps work. Here is what i found
The wire is cut but it is hard to tell how i can reconnect it. It is for the light bulb for the license plate.
The wire is cut but it is hard to tell how i can reconnect it. It is for the light bulb for the license plate.
#2
Hrm... I know that all too well. There are 2 light for the license plate on my 93 and one was melted to the inner bumper and the other one the soctet is shakey. When trying to switch the new sockets over, all of them except one (both red and white cars') broke cause they are so brittle.
I would try and find a bulb socket either fron the junkyard, or parts store and wire it in there. Use the shrink wrap so water doesn't get in the spliced connection.
I would try and find a bulb socket either fron the junkyard, or parts store and wire it in there. Use the shrink wrap so water doesn't get in the spliced connection.
#3
Originally Posted by JimmyFloyd
Hrm... I know that all too well. There are 2 light for the license plate on my 93 and one was melted to the inner bumper and the other one the soctet is shakey. When trying to switch the new sockets over, all of them except one (both red and white cars') broke cause they are so brittle.
I would try and find a bulb socket either fron the junkyard, or parts store and wire it in there. Use the shrink wrap so water doesn't get in the spliced connection.
I would try and find a bulb socket either fron the junkyard, or parts store and wire it in there. Use the shrink wrap so water doesn't get in the spliced connection.
Thread
Thread Starter
Forum
Replies
Last Post
seanohio
Everything Electrical & Electronic
4
05-28-2009 06:43 AM
harofreak00
General GM Chat
8
03-26-2007 06:44 AM