94 SC brakes??
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2006
Location: southwestern Ontario, Canada
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
94 SC brakes??
i had bleed the entire brake system with the car not running, the pedal presssure and height was perfect!! but , when i started the car my pedal goes to the floor??
if i rev the engine constant at 2000-2500 rpm the pedal is stiff again until the rpm drop to idle , then i have no pedal??? :?
if i rev the engine constant at 2000-2500 rpm the pedal is stiff again until the rpm drop to idle , then i have no pedal??? :?
#4
Senior Member
True Car Nut
Join Date: Aug 2004
Location: In your garage, swipin' da lug nutz
Posts: 3,067
Likes: 0
Received 1 Like
on
1 Post
I dunno....is it??
If it is, did you bench bleed it before installing the lines to it? It is also possible to get one bad from the box...esp. if it is a reman.
If it is, did you bench bleed it before installing the lines to it? It is also possible to get one bad from the box...esp. if it is a reman.
Thread
Thread Starter
Forum
Replies
Last Post