Removing Seat Covers
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
Removing Seat Covers
Ok... I have a question on how you remove the back part of the driver and passenger seat... just the leather cover. Seats are the 9 way. I would like to swap the driver and passenger ones since they look to be both the same. if someone has instructions or pictures, Iwould appretiate them a lot. Thanks.
#2
Junior Member
Posts like a Ricer Type-R
Jimmy, you have to detach the seat cover at the base of the seat back under the netting pocket. Hard to describe, but you'll see it if you cram yourself under there. Then peel the back upwards.
#4
Senior Member
True Car Nut
On my '92, parts of the seat back were fastened to the core with velcro and when I got close to the top, I had to pull the headrest out. I had to make a tool to keep the spring out of the way on one side while I used a screwdriver on the other.
Getting the thing back on is a lot like stuffing a sausage!
I'll bet someone here knows the correct way ( or at least a better way) to remove the headrest. :?:
Getting the thing back on is a lot like stuffing a sausage!
I'll bet someone here knows the correct way ( or at least a better way) to remove the headrest. :?:
#7
Senior Member
True Car Nut
Here'* some pics and descriptions. Towards the bottom of the page and the second page:
http://www.bonnevilleclub.com/forum/...ic.php?t=25212
http://www.bonnevilleclub.com/forum/...ic.php?t=25212
#10
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by randman1
Here'* some pics and descriptions. Towards the bottom of the page and the second page:
http://www.bonnevilleclub.com/forum/...ic.php?t=25212
http://www.bonnevilleclub.com/forum/...ic.php?t=25212
The pix were very well done.... I think I'm going to attempt to take my drivers seat apart in my 91 and see what the problem is.