98 bonneville changing waterpump ??

Reply Subscribe

Thread Tools

Search this Thread

07-26-2005, 04:56 PM

cvc

Senior Member

Posts like a Turbo

Thread Starter

Join Date: Dec 2004

Posts: 303

Likes: 0

Received 0 Likes on 0 Posts

98 bonneville changing waterpump ??

what are the steps needed to chg the waterpump ? My bro is telling me its a pain you ned to drop the motor mount etc he just did his 94 Lesabre. Is this a big job ??

Reply Like

07-26-2005, 06:11 PM

banned3800

Guest

Posts: n/a

On the L36 Powered Bonneville you do not have to remove the torque axis mount.... The L27 was a bit of a pain in that area... But on the L27 the Belt was easly replaced...

You will simply break the water pump pulley bolts loose, remove the belt, remove the water pump pulley bolts...

Then you will remove the 2 bolts from the power steering pump, 1/2" I think... Push the PS pump out of the way being careful not to hit the oil pressure sending unit...

Remove the bolts from the water pump, pull the water pump, clean the mating surface, install the new pump and gasket...

Then do everything else in reverse order...

The L36 is a very easy engine to change a water pump on..

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Reply Like

07-27-2005, 08:15 AM

mkaake

Senior Member

Posts like a Camaro

Join Date: Jan 2004

Posts: 1,166

Likes: 0

Received 1 Like on 1 Post

just as a heads up, in case you didn't notice it - the two bolts you need to free up to move the p/* pump are located at 12 and 6 o clock behind the p/* pump pulley.

easy job, just take your time cleaning off the old gasket material.