L67Riviera, I need to ask you a question
#1
Senior Member
Certified Car Nut
Thread Starter
L67Riviera, I need to ask you a question
Check your PM'*. The Series II FPR does not look like it will fit in place of a Series I. Do I need to modifiy it in some way?
#2
Member
Posts like a V-Tak
Join Date: Jan 2004
Location: Shelton, CT
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
did you remove your old one and match it up to the new? Theyre a little stubborn coming out and goin in. It should be the same size though, and a little infulence is needed to install them. A slight tap with a rubber hammer with a rag over it works for me everytime. Once you hear it click in, your golden. No mods are needed to do this.. Are you sure you got the right part? Im gonna print out the TSB tomorrow at work and verify the part number for you and Im gonna try to cut and paste from alldata to online at work and email myself the TSB for everyone here to read.
#3
Senior Member
Certified Car Nut
Thread Starter
I pulled my old one out first. It has a longer and wider tip. The tip of the new one wouldn't seal. The small plastic bag it came in has the 96 NA FPR part number on it.
#9
Senior Member
Certified Car Nut
Thread Starter
The part number 24506988 that you just supplied me is listed on GMPD as for the 96 L67, not the L36. I think I got what I ordered part number wise, but not what we thought I was gonna get.
Thread
Thread Starter
Forum
Replies
Last Post