Is this the right pulley?
05-19-2008, 03:12 AM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2008
Location: superior wi,
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Is this the right pulley?
Ok I own a 94 SSEI. I'm lookin for a 92-93 */c pulley and I'm wondering if this is the right one?
http://catalog.autopartsgiant.com/it...autopartsgiant
http://catalog.autopartsgiant.com/it...autopartsgiant
05-19-2008, 08:25 AM
#2
Junior Member
Posts like a Ricer Type-R
That'* the idler pulley that goes on the tensioner just below your supercharger. Is yours making noise?
Or did you mis-communicate?
Smaller SUPERcharger pulleys are available at www.pulleyboys.com but you have to go through this first (or risk damaging your motor):
http://www.bonnevilleclub.com/forum/...=article&k=104
Or did you mis-communicate?
Smaller SUPERcharger pulleys are available at www.pulleyboys.com but you have to go through this first (or risk damaging your motor):
http://www.bonnevilleclub.com/forum/...=article&k=104
05-19-2008, 11:39 AM
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2008
Location: superior wi,
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
That'* the idler pulley that goes on the tensioner just below your supercharger. Is yours making noise?
Or did you mis-communicate?
Smaller SUPERcharger pulleys are available at www.pulleyboys.com but you have to go through this first (or risk damaging your motor):
http://www.bonnevilleclub.com/forum/...=article&k=104
Or did you mis-communicate?
Smaller SUPERcharger pulleys are available at www.pulleyboys.com but you have to go through this first (or risk damaging your motor):
http://www.bonnevilleclub.com/forum/...=article&k=104
But pulley boys charges so much.. like 80 bucks for a metal pulley...
Oh dont worry I am deffinatly going to get the pre modification tune up and KR checking stuff done first.
Thread
Thread Starter
Forum
Replies
Last Post
dbtk2
Performance, Brainstorming & Tuning
13
08-27-2003 11:30 AM
Mark Peters
Performance, Brainstorming & Tuning
10
03-21-2003 08:42 PM
