Someone with a 1993 FACTORY service manual-- I need help
 

I beleive the ECC system i pulled from the junkyard car was a 1993 unit and not a 1994. What i need is either

a) a list of wires, their color, position number and where they goto or
b) scanned in schematics from the same section that would give you the above

I only NEED this for the Heater and A/C control assembly (the part that has teh buttons on it, NOT the programmer)

But if your willing to give me the wiring diagrams for the programmer i will be happy to take them as well... but i think the majority of wires are the same.. the only difference so far is at the control unit (one wire i cant find what it does) and a slight mislabeling


I hope that was not too confusing.. if so, let me know, i will try and clarify...

Thanks!

PM your email and I'll help ya as best I can with the schematics

Have you checked your local public libary? Mine has manuals all the way back to the 1960s.

I dont think mine is that well stocked but some near here might.. ill have to check that out, but its too far away at the moment... and its quarter to one in the morning :wink:

Opening books now.

(best viewed monospaced)
From Page 8A-68-0 of the '93 FSM:

HEATER AND A/C CONTROL ASSEMBLY

Connector Wire Circuit Destination
Cell # Color Number
1: GRY 8 INTERIOR LAMPS DIMMING, Cell 117
2: PPL/WHT 724 RADIO, Cell 150
4: DK GRN 835 STEERING WHEEL CONTROLS, Cell 89
5: DK GRN 835 C5 of HVAC PROGRAMMER
11: BRN 50 Fuse 17, 25 AMP
9: BLK 152 GROUND



HVAC PROGRAMMER

Connector Wire Circuit Destination
Cell # Color Number
C1 BLK/WHT 803 GROUND
C5 DK GRN 835 5 of HEATER AND A/C CONTROL ASSEMBLY
C6 BLK 151 GROUND
C7 DK GRN 835 DATA LINK CONNECTOR, PIN J
C10 TAN 800 PIN D1 of C1 of PCM
C11 NOT USED
C12 BRN 50 Fuse 17, 25 AMP
C13 ORN 40 Fuse 11, 15 AMP
D6 YEL 61 SENSOR RETURN
D8 GRN/BLK 735 AMBIENT TEMPERATURE SENSOR
D7 DK GRN 734 IN-VEHICLE TEMPERATURE SENSOR
D10 LT BLU/BLK 590 SOLAR SENSOR

Thanks Dame! You are tha man!!