PCV Replacement for SE Models...
PCV Replacement for SE Models...
02-22-2010, 06:40 AM
#2
Retired
Certified Car Nut
This is where it is located. It sits below this plastic cap, but yours is going have a an electrical connector on it also.
To remove, spimply disconnect the connector
Turn the cover counter clockwise and pull straight up.
You may need a pair of need nose pliers to pull the PVC valve out.
Once out, shake it, if it rattles, its good. Make sure the big o-ring goes back into place.
To remove, spimply disconnect the connector
Turn the cover counter clockwise and pull straight up.
You may need a pair of need nose pliers to pull the PVC valve out.
Once out, shake it, if it rattles, its good. Make sure the big o-ring goes back into place.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
02-23-2010, 12:31 AM
#3
Senior Member
Posts like a Turbo
Join Date: May 2003
Location: B'ham.AL
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Changing PCV valve with pictures.
http://macgp.clubgp.com/howto/engine/pcv/gt/pcv.html
http://macgp.clubgp.com/howto/pcv/pcv.html
http://macgp.clubgp.com/howto/engine/pcv/gt/pcv.html
http://macgp.clubgp.com/howto/pcv/pcv.html
Thread
Thread Starter
Forum
Replies
Last Post
