Ok am starting a nw post if its ok,I am not getting spark on 97 SE,I can bump starter ever now and agin and it may spark,I had replaced the crank sensor back during the summer when I cut the car off 1 day and it never fired back up,replaced crank sensor and new plugs and was good,now car is acting up again like before bt if i keep bumping over starter i can get to crank after many times bumpin starter?I looked and found all grounds except the 1 near the oil filter,i did find 1 behind the starter, not connected to it but on the front block is this the same 1?it wasn't loose ,I am putting a new crank sensor on in the morning and see what happens, If 1 or more of the plugs were fouled would i get this no fire situation?

Honestly, have you followed ALL the advice and tested EVERYTHING suggested in this thread?

http://www.bonnevilleclub.com/forum/...hlight=#798817

If not.. we'll end up going around in the same circle and coming back with another new thread from you asking for help. You really need to stay in that thread and go through the suggestions one by one.

If we were local to you, we could probably get to the solution quicker.

Where are you located?

Please continue in your OTHER topic (for the third time, we've had to lock a topic on this) so we don't have to go back and forth to stay up to speed.