spark plugs
#2
Senior Member
Certified Car Nut
I don't remember the size, but I think it'* a 5/8" deep socket. My 3/8 socket set came with a special spark plug socket, so I never have to figure out what size it is. When you get your new plugs, just use one to see what socket fits.
I find it helps to remove the strut tower bar for more room to work on the rear plugs. They probably have a shield on each plug boot. Just pull it back, and try not to cut yourself when your pulling real hard and they pop off. Same with the plug wire boot themselves.
I find it helps to remove the strut tower bar for more room to work on the rear plugs. They probably have a shield on each plug boot. Just pull it back, and try not to cut yourself when your pulling real hard and they pop off. Same with the plug wire boot themselves.
#3
Senior Member
Posts like a Corvette
Join Date: Oct 2002
Location: New Jersey - Most of Our Elected Officials Have Not Been Indicted
Posts: 1,483
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by jwikoff99
Just pull it back, and try not to cut yourself when your pulling real hard and they pop off. Same with the plug wire boot themselves.
Thread
Thread Starter
Forum
Replies
Last Post
buickpower3800sc
Performance, Brainstorming & Tuning
4
03-15-2003 04:27 PM