Loose connection - any ideas where it belongs?
#1
Loose connection - any ideas where it belongs?
1994 Bonneville is acting up. RPM'* drop suddenly and car seems not to respond to pressing the gas pedal.
I was checking the connection of the crank sensor and noticed a connector that was hanging loose. I have no idea where it should be going.
Its on the front of the engine and comes off the connection on the lower left (AC compressor?). That line splits in 2 and the smaller connection (2 wires) is connected but the other part (3 wires - Red/White, Orange, Brown) is not connected.
Anyone know where this connection should go?
Thanks
I was checking the connection of the crank sensor and noticed a connector that was hanging loose. I have no idea where it should be going.
Its on the front of the engine and comes off the connection on the lower left (AC compressor?). That line splits in 2 and the smaller connection (2 wires) is connected but the other part (3 wires - Red/White, Orange, Brown) is not connected.
Anyone know where this connection should go?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Trans68am
Chevrolet
2
07-02-2010 06:41 AM