TB removel and cleaning
#2
Yes, you can do it very easily with hand tools. 3 bolts to unbolt it from the intake. I think they're 10 MM. Pick up a fresh gasket because they're not really reusable.
For cleaning, remove all the sensors first. Then, I like to fill up a coffee can with gas. Put the throttle body right in the coffee can of gas and let it soak. Use a soft bristle brush to clean off every crevis. Rinse with water. Let dry. Reinstall.
For cleaning, remove all the sensors first. Then, I like to fill up a coffee can with gas. Put the throttle body right in the coffee can of gas and let it soak. Use a soft bristle brush to clean off every crevis. Rinse with water. Let dry. Reinstall.
#3
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
If you're like some of us, and can't get your sensors out, just get some sensor safe intake cleaner, or brake cleaner or something.
#5
Guest
Posts: n/a
Just be safe, go to autozone and get a can of STP throttle body and intake cleaner... You won't be sorry... That stuff is strong enough to clean the crapp out of the throttle body and is plate coating safe... Good stuff
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post
DeathDealer
Chevrolet
13
10-30-2013 05:32 PM