Rad Cap and T-stat
 

What type of Rad. Cap and t-stat should I use on my 97 3800 non-sc bonneville. I am putting on a new intake next week. should I use a stant cap and t-stat? What pressure cap and type should I use?

Thanks
Mike

The Stant Part #'s for 16LB Cap is #11231
180 degree Thermo(which most people here recommend) is #45848
I'm not sure about this but you may(should?) replace the Thermostat gasket if one exists.

is that thermostat the same one that can be used in the 93? I've been thinking about switing mine over.

Same one. For the 93 and 97, you also need the fiber outlet housing gasket, and the rubber seal around the thermostat flange.

or i other words a rubber gasket and a paper gasket one for the t stat and 1 for the other 1