having shift problems
#1
having shift problems
hello i have a 93 bonneville the tranny that was in it slipped between 2 nd and third i bought a tranny from a salvage yard and installed it now i have no first gear, car wants to take off in second gear and there is no overdrive.it shifts between 2nd and drive good.does anybody have any ideas why i couldnt manulaly shift to first.or why it wouldnt be shifting into overdrive.any ideas on what to try.thanks,,,,,,,,,mark
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Sounds like a bad trans. We have a gearhead that has a ton of transmission knowledge. He should chime in soon. I believe that'* a 4t60 trans, but I could be wrong.
#3
Retired
Dan may be on the money, but I'm also thinking something else, like maybe you have a different year trans installed. If it is a 4T60E, and if you can, get me the model # off the tag and I can tell you if you have the correct trans. This will really tell us if you have the correct trans.
BTW, I'm not the highly recommended, sought after trans guy. We are waiting for the trans GOD to make his entrance. lol
BTW, I'm not the highly recommended, sought after trans guy. We are waiting for the trans GOD to make his entrance. lol
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#4
Senior Member
Posts like a Northstar
Join Date: Oct 2009
Location: Boston Mass
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
Does the trans automatically upshift from 2-3 or will it only upshift 2-3 manually? If it does it automatically, you may have a bad shift solinoid. If it only upshifts manually, check to make sure that you have battery voltage @ the pink (or red) wire @ the transmission case connector. It should be pin "E". You do have a 4T60E. If you can a scan tool, scan the computer for codes, and let us know what has been set.
#6
Retired
Whereabouts are the fuses? Even I'm curious.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#7
Senior Member
Posts like a Northstar
Join Date: Oct 2009
Location: Boston Mass
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
There could be 2 fuse boxes. One on the drivers side and maybe on on the passenger side. I had a few 93-94 Olds 88'* with similar issues and found a blown fuse in the fuse box under the glove box. Sometimes the label on the fuse box does not even mention that the fuse has anything to do with the trans, so you just have to test every fuse with a test light with the ignition on.
#8
Retired
Duly noted. Thanks for the info!
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#9
hello yes it shifts between 2nd and 3rd automaticly.it just seems to want to start out in 2nd and doesnt want to shift into overdrive,the tranny i put in the car is the same year as the one i took out.it is the 4T60E tranamission,i checked for power to the plug that goes to the TCC plug and it seems to have power i even took the shift solinoid out of the other trans to see if the TCC plug wire on the car had power and the solinoids clicked like they wanted to work,I dont have a scan tool to get the codes off the comp, but with this tanny im getting a check engine light where i didnt get it with the other tranny. thanks for all the help im going to check for a blown fuse today,,,,,,,,,,,,,,,,,,,,,mark