Q's on OBDII conversions
has anyone done one before? I am looking to try one on a 1995 SII bonne.
Can anyone give me some technical information about the wiring harness for the engine? Like how it is run through the firewall, etc. this doesn't seem to me like a difficult task being that i have done quite a few swaps on GP's, cutty's and of course my lumina. So any help or direction to find help would be greatly appreciated. Thanks -Brian- |
What do you actually need? Wires run through connectors that meet at the firewall.
|
Like Bill B (#2) said, the engine and trans wiring harness plug into a huge bulkhead connector at the firewall. IIRC, it is covered with an asphalt sheet and has a 10mm-head bolt to draw the halves together. I have a '95 FSM, and can post the pinouts for that connector if you like.
|
that would be cool to get the pinouts. it would atleast get me started. my other questions would be was everything switched to OBDII in 96? and did it still use the 4T60? with the vacum modulator it think.
|
Originally Posted by luminal67
that would be cool to get the pinouts. it would atleast get me started. my other questions would be was everything switched to OBDII in 96? and did it still use the 4T60? with the vacum modulator it think.
|
Bill B meant to say the bolt is a 7MM or 8MM. (I'm not Bill B...I'm Boost ;) )
|
Originally Posted by BillBoost37
Bill B meant to say the bolt is a 7MM or 8MM. (I'm not Bill B...I'm Boost ;) )
|
2 Attachment(s)
Originally Posted by bill buttermore
... I have a '95 FSM, and can post the pinouts for that connector if you like.
Attachment 55220 Attachment 55221 |
Originally Posted by bill buttermore
Originally Posted by bill buttermore
... I have a '95 FSM, and can post the pinouts for that connector if you like.
https://i26.photobucket.com/albums/c...harness600.jpg https://i26.photobucket.com/albums/c...260pins600.jpg Can you PLEASE tells us what you've got IN YOUR CAR right now, and WHAT car? I believe he is trying to help someone with an OBDII conversion and thats why he is asking..... Shawn |
Thanks, Shawn. It really helps to know what's going into what so we can get a clearer picture of what he may need.
|
All times are GMT -4. The time now is 01:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands