I don't trust my PCM....need advice
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jul 2004
Location: Detroit, MI
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I don't trust my PCM....need advice
What'* up everyone.
I just put a new motor in my 95 SE. The motor is great, but I'm still getting some of the driveability symptoms i had before i replaced it (i.e., hesitations/misfires underload).
I'm thinking my ECM/PCM is in limp mode. I've replaced almost everything on the car, so that might have something to do with it.
REPLACED
Fuel Delvery: Pump, regulator, injectors cleaned at rebuild.
Ignition: Alternator, battery, ICM, coils, plugs and wires
Others: crank sensor, EGR, O2, TPS.
I swapped a MAF of a 92 SE and it didn't help.
I need advice on what to do. I'm trying to locate a salvage yard PCM, but no one around here has one.
I've heard about the dealer "flashing" the PCM. Will that fix my problems?? or do I have to find another PCM? Can I get one from Murray'*/Autozone?
Any advice is appreciated.
I just put a new motor in my 95 SE. The motor is great, but I'm still getting some of the driveability symptoms i had before i replaced it (i.e., hesitations/misfires underload).
I'm thinking my ECM/PCM is in limp mode. I've replaced almost everything on the car, so that might have something to do with it.
REPLACED
Fuel Delvery: Pump, regulator, injectors cleaned at rebuild.
Ignition: Alternator, battery, ICM, coils, plugs and wires
Others: crank sensor, EGR, O2, TPS.
I swapped a MAF of a 92 SE and it didn't help.
I need advice on what to do. I'm trying to locate a salvage yard PCM, but no one around here has one.
I've heard about the dealer "flashing" the PCM. Will that fix my problems?? or do I have to find another PCM? Can I get one from Murray'*/Autozone?
Any advice is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post