systems monitor

Reply Subscribe

Thread Tools

Search this Thread

10-22-2009, 10:05 PM

gary0326

Member

Posts like a V-Tak

Thread Starter

Join Date: Jul 2009

Posts: 51

Likes: 0

Received 0 Likes on 0 Posts

systems monitor

on my systems monitor it doenst show when one of the doors is open only when i need to check gages. why would this be?

Reply Like

10-22-2009, 10:16 PM

2kg4u

Senior Member

True Car Nut

Join Date: Sep 2006

Location: Windsor, Ontario / Detroit, Michigan

Posts: 4,816

Likes: 4

Received 241 Likes on 198 Posts

There is a spring loaded button switch in the door frame that gets depressed when the door closes. Perhaps that switch is stuck in the closed position and not releasing when you open the door.

Just a theory.

Reply Like

10-23-2009, 07:23 AM

nedder

Junior Member

Join Date: Oct 2009

Posts: 2

Likes: 0

Received 0 Likes on 0 Posts

Have the same issue on mine - checked all the door switches, and they are fine. Any other ideas?

Reply Like

10-23-2009, 11:48 AM

Purplehazeir

Senior Member

True Car Nut

Join Date: Sep 2008

Location: Arlington, WA

Posts: 7,979

Likes: 0

Received 1 Like on 1 Post

I would check your ground bus.... https://www.gmforum.com/t278980/ Then we can move on from there with switch testing and chasing down wires.

Reply Like

10-24-2009, 09:03 AM

L67SE

Junior Member

Posts like a Ricer Type-R

Join Date: Aug 2009

Posts: 21

Likes: 0

Received 0 Likes on 0 Posts

Doesn't the base cluster not show door ajar? I've had 5 SE'* with the standard cluster and none of them showed when a door was open.(but did show "check gages")