windshield wiper issues
#1
Junior Member
Thread Starter
Join Date: Feb 2008
Location: Saratoga, N Y
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
windshield wiper issues
My 95 SE is having wiper issues. There is power to the switch but the wipers won't operate. I can't seem to locate a part number for the switch. It controls the headlight dimmer switch along with the wiper control. When I look up "dimmer switch" it shows the switch located on the column,not the part where the turn signal handle connects. Anyone have any ideas? I don't even know what to call the #$@! thing. I've replaced the multi function switch,to no avail. The part I need is where the turn signal handle connects. Thanks in advance for any input.
#3
Junior Member
Thread Starter
Join Date: Feb 2008
Location: Saratoga, N Y
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
no power to the motor,but there is power to the switch. I skinned back the wires, and used a jumper wire. The wipers worked when I did that. That how I discovered the switch was bad.
#4
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Go to www.rockauto.com and follow the menu to your car. Your looking for this area.
1996 PONTIAC BONNEVILLE SE 3.8L 231cid V6 MFI (K) : Electrical-Switch & Relay : Wiper Switch
Looks like what you need is between $60 and $70 or so. Sorry, can't give you a link right to it, the site don't work that way.
1996 PONTIAC BONNEVILLE SE 3.8L 231cid V6 MFI (K) : Electrical-Switch & Relay : Wiper Switch
Looks like what you need is between $60 and $70 or so. Sorry, can't give you a link right to it, the site don't work that way.
Thread
Thread Starter
Forum
Replies
Last Post