96 Bonnie - Anyone know the part number for the plastic panel just to the right (driver side) of the airbox? Its the thing held down with two wing-bolt things and it covers some electrical stuff. Mine...uh...broke. Thx.

Sounds like a job for the Rat... quick.. put on the Rat beacon so he knows he'* needed... and let him pull up his utility belt.. and he'll help ya with any part number ( since he works for GM and has all the bibles in his diposal.... lucky ***** hee hee.. )

I'm going to need a little better description if possible!
Hey I resemble that remark!

Sounds like he means the PCM cover--on the 96, it'* tucked in between the air filter housing and the fender--like he said, just a plastic cover with two long wingnut/bolt thingys that hold it down.

(and yes, "wingnut/bolt thingys" IS proper terminology dammit!)

Don't most GM parts have the P/N stamped in them? Got the remains of the roiginal?
Jim

Didn't think of that. I'll run out to the parking lot and check during lunch...

If it does, it may be a little better help. That P/N will be a "Production P/N" though & not a "Service P/N" but it'* a start!

Wesbo, I'm glad you brought this up because I just broke mine yesterday trying to check my air filter and the screw closet to the front is stripped. Only the other screw comes off.

That'* similar to the fate that mine encountered. What a poopy design...

Well here you go:
RE: 96 SE PCM Cover:
P/N: 25647543 & Lists for $ 51.95 CDN or Wholesale $ 41.56 CDN!

I know, you've all heard this before, but run that number through www.gmpartsdirect.com , it'll probably be 1/2 that price.