That helped alot.
Your head gaskets didn't blow. Your Upper Intake Manifold failed, and is still bad. You are fouling plugs with coolant, causing your misfire. This should tell you everything you need to know: http://www.bonnevilleclub.com/forum/...e=article&k=38 |
ok now it is back P0300 and I can not find the problem any idas It runs ruff wen i come to a stop and it feels like it want to move foward..
|
Originally Posted by dogman4585
ok now it is back P0300 and I can not find the problem any idas It runs ruff wen i come to a stop and it feels like it want to move foward..
Check your coolant level, is it low? |
Yes i did and It got fixed by a coil pack was bad and now its back and every thing is all right coolant is fine and the oil is great no leak in hoses
|
I don't think you understand. You still have the SAME UPPER INTAKE MANIFOLD on your car? Correct?
You are going to go either BOOM or POOF very soon. You didn't read what we were trying to tell you. |
so sorry for not talking sooner but it is fixed and man you have no idea what it was and man you were off track.. it was a plug and a bad wire will post pic of it soon of plug
|
Originally Posted by dogman4585
so sorry for not talking sooner but it is fixed and man you have no idea what it was and man you were off track.. it was a plug and a bad wire will post pic of it soon of plug
|
Originally Posted by dogman4585
so sorry for not talking sooner but it is fixed and man you have no idea what it was and man you were off track.. it was a plug and a bad wire will post pic of it soon of plug
|
Dogman... The Series 2 NA motor (the one you have) is known to suffer a failure with the upper intake manifold. While yours may seem to be holding up well, please see the following link in case you car does start to exhibit the symptoms which happen to be close to the ones you had with this thread.
http://www.bonnevilleclub.com/forum/...e=article&k=38 |
All times are GMT -4. The time now is 05:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands