Grounding A/F sensor?
#1
Senior Member
Certified Car Nut
Thread Starter
Grounding A/F sensor?
After putting in a new O2 sensor a couple weeks ago, I noticed my A/F gauge was still reading rich (I normally have it stashed away until I get my pillar pod in). The last two days, it'* just been on full rich all the time. So I yanked the signal wire last night, and the reading didn't change. I'm thinking it was grounding out and affecting my O2 signal. I got on it a couple times on the way to work today and I didn't see my characteristic light smoke puff in the mirror.
#6
Senior Member
Certified Car Nut
Thread Starter
Originally Posted by willwren
Email Kyle.
#7
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by J Wikoff
Originally Posted by willwren
Email Kyle.
John, take the gound wire on the gague and use the ground that is on the Parking brake mounting plate, that is what i used for both my A/F and my Trans Temp and they work perfect
#8
Junior Member
Posts like a Ricer Type-R
Originally Posted by 1993 SLE
Originally Posted by J Wikoff
Originally Posted by willwren
Email Kyle.
Thread
Thread Starter
Forum
Replies
Last Post