pcv valve
#3
Senior Member
Posts like a 4 Banger
Join Date: Nov 2010
Location: Lorain, Ohio
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
On the left side of the UIM. Press down a bit and turn counter clockwise, then pull off the cover, be careful of the O-ring, and pull out the spring and PCV with needle nose pliers.
When putting the new one in, make sure to lube up the oring with some fresh motor oil.
When putting the new one in, make sure to lube up the oring with some fresh motor oil.
Thread
Thread Starter
Forum
Replies
Last Post