GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat

GM Forum - Buick, Cadillac, Chev, Olds, GMC & Pontiac chat (https://www.gmforum.com/)
-   1992-1999 (https://www.gmforum.com/1992-1999-91/)
-   -   MAF Sensor screws (https://www.gmforum.com/1992-1999-91/maf-sensor-screws-261454/)

Kimbo 07-25-2007 01:16 PM

MAF Sensor screws
 
I'm attempting to do a TB cleaning, however my MAF sensor screws are torx, T-20 I believe, and have a post in the middle of the head. None of my Torx bits have a hole to accommodate it. Is there a special bit? If so where can it be found?

harofreak00 07-25-2007 01:19 PM

you can use a special security bit, available at most hardware stores...

or you can just use a dremel or hacksaw of some type to notch out a groove so you can use a flathead screwdriver ;)

I have some screws that I could send you to replace those stupid ones once you get them out, if you want them, PM me

Kimbo 07-25-2007 02:02 PM

1 Attachment(s)
Thanks for the tip, the hacksaw worked.

I imagine this contributed to my stuttering:

Attachment 44861

BillBoost37 07-25-2007 03:11 PM

Maybe..

You should notice a difference once that is all cleaned up.


All times are GMT -4. The time now is 06:58 AM.