MAF/Mass Airflow Sensor
I got a MAF sensor code (don't know whitch one) on my mom's 98 SSEi. WE replaced i and the code is still coming on and the car wants to stall when code. Any ideas?
|
Are your spark plug wires well away from the MAF wires? Sometimes the high voltage spark plug wires cause interference with the MAF wires.
|
When you change the MAF sensor you should remove the negative battery connection for about a half hour. This will reset the computer, typically needed when replacing a bad MAF.
|
I reset the codes by unplugging the batt. and it came back on. The wires are stock and not too close. I have not changed anything since this became a problem. We also drove on it like this for a long time. could it be the computer. It is still wanting to stall, so I think it wouldn't but who knows.
|
Or the new sensor is bad too...
|
check techinfo..I think there's a test you can do on the maf..
|
You may be on to something with the PCM being bad. Check the MAF as suggested, and also trace the wires to make sure they're in good shape. A bad electrical connection could be the culprit. However, if those things don't fix you up, look into a junkyard PCM. I believe you'll need a dealer to perform a CASE learn for you, but it'll be worth it to get up and running normally.
|
All times are GMT -4. The time now is 12:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands