need help
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2008
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
need help
tested my bonnie the other day needed map sensor turned off engine light worked good for about half an hour. engine light back on new code is p0102mass volume curcuit low input . what does this meen .over the last 6 months ive replaced fuel pump ,fuel filter air filter ,maf sensor,o2 sensor cat converterand mufflercoils ,plugs and wires .the car still isnt rite.on the weekend i cleaned all the grounds [electrical]for the last week i ll be driving across town and as soon as i take my foot off the gas the car stops running.im unemployed for almost a year now for health reasons and i cant keep buying new parts does anyone have any ideas thanks.P.*.everytime i replace anything i unhook the batteryfor up to an hour to reset the computer
#2
Please read this: http://www.bonnevilleclub.com/forum/...ic.php?t=73691
You said you replaced the MAF, with a used one? new one? Did you check the wiring at the plug?
You said you replaced the MAF, with a used one? new one? Did you check the wiring at the plug?
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2008
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
just had my mechanic skan my bonnie and the new maf sensor even thogh it looked fine was malfunctioning we put in the old one it scanned fine .now if the weather ever brakes here im going to change plugs and wires and hope for some worry free driving for awhile.the car stopped stalling on deseleration aswell
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2008
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
fixed
this afternoon i checked out the plugwires and plugs on my bonnie mechanic replaced in the fall of 07. all wires were broke at the plug connection obviously cheap 7mm. wires even a broken plug which was broke for a long time judging by the dirt in the crack.replaced with a/c delco 8mm. wires and new plugs .went for a test ride and believe me my bonnie is back.i forgot how quick she was.now all i have left is to change the front hubs if it ever stops snowing here.
Thread
Thread Starter
Forum
Replies
Last Post
Custom88
Everything Electrical & Electronic
10
06-22-2004 10:58 PM