97 wiring harness
12-27-2009, 09:07 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2009
Location: Iron Range MN
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
97 wiring harness
Anybody know "for sure".... I'm doing a */C motor trans swap into a NA car and someone cut the firewall plug off the */C'* engine harness. I got to looking at the motors and I do not see any additional sensors or electrical on the */C motor. Could I use the NA engine harness???
Hopefully my english is clear enough that you guys understand my question
Hopefully my english is clear enough that you guys understand my question
Last edited by taguy94; 12-27-2009 at 09:08 PM.
12-29-2009, 10:29 PM
#3
Senior Member
True Car Nut
Join Date: Feb 2002
Posts: 3,993
Likes: 0
Received 0 Likes
on
0 Posts
if you are using an engine and trans fron the same year. you could use the NA harness, and get the L67 swap harness from ZZP: https://www.zzperformance.com/grand_...=173&catid=108
That should give you what you need wiring wise. You could probably use the harness connector from the NA for the SC, but you'd have to make all those wiring connections.
Also, what years are the cars. If the 97 is NA, you might have a different trans connector plug. Take pictures if you want help determining that.
That should give you what you need wiring wise. You could probably use the harness connector from the NA for the SC, but you'd have to make all those wiring connections.
Also, what years are the cars. If the 97 is NA, you might have a different trans connector plug. Take pictures if you want help determining that.
Thread
Thread Starter
Forum
Replies
Last Post
yukong
Audio (and aftermarket electronics)
4
05-18-2004 12:49 PM
Punkrulz
Audio (and aftermarket electronics)
4
05-10-2004 12:11 AM
mikeblue94
Audio (and aftermarket electronics)
7
03-30-2004 09:13 AM