1994 SSEI

rearview mirror detached cleanly from windshield; cleaned windshield and bought glue for remounting.

cannot remove bracket from the mirror--no set wrench points
large metal 'slab' is connected to bracket and made contact with windshield--this slab will not come off

advice?
mp

There should be an Allen key socket to loosen and tighten the mirror bracket to the metal plate... ..thats how it was on my 89 SE when my mirror fell off

I know on my 92 the tab simply snaps into place. You may notice a small metal tab slightly protruding from the tab. You will need to pry it out. Odds are it'* locked in prety good.

This type of mounting was pretty short-lived in that the way the tin clip was attached to the mirror is that pins were peened over. Over time, they loosened up a bt and the mirror would be very wobbly. Translate to can see ANYTHING behind you when going down a gravel road.

Anyways, snap the tab free, glue it on, and you will be able to snap the mirror back into place. No tools required.

Hope it helps and I'm glad that they no longer make'em like that.