Preparing to do Value cover Gaskets
#5
DINOSAURUS BOOSTUS
Expert Gearhead
I'd also suggest a 3/8" standard 6 point socket. It'* going to be slow. I did mine.
Front
Coil pack needs to be moved, and the engine lift bracket needs to be loosened. Cover won't just slip past.
Back
Alt bracket comes out, MAP bracket/EGR guard comes out. Engine lift bracket is tough to get at...again needs to be loosened. Also take off the bracket that the O2 sensor plug is clipped onto.
Here'* a Frankenbonne thread...scroll down until you see the motor. That'll give you an idea of what'* in the way.
http://www.bonnevilleclub.com/forum/...=37744&start=0
Front
Coil pack needs to be moved, and the engine lift bracket needs to be loosened. Cover won't just slip past.
Back
Alt bracket comes out, MAP bracket/EGR guard comes out. Engine lift bracket is tough to get at...again needs to be loosened. Also take off the bracket that the O2 sensor plug is clipped onto.
Here'* a Frankenbonne thread...scroll down until you see the motor. That'll give you an idea of what'* in the way.
http://www.bonnevilleclub.com/forum/...=37744&start=0
Thread
Thread Starter
Forum
Replies
Last Post