swap engine from a 02 impalla to 95 bonn.
#2
Retired
More than likely the PCM(due to changes of sensors) PCM wiring harness, and depending what trans was attached(possibly the 4T60E) the trans also.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#3
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
You'll need the p/* engine mount, rear exhaust mani, throttle body, map sensor plug in the UIM, and wiring harness from the 95.
You may have to swap over the tensioner assembly and alternator too. The alt in the 95 only has one wire and the heater core coolant lines might be different.
You may have to swap over the tensioner assembly and alternator too. The alt in the 95 only has one wire and the heater core coolant lines might be different.
Thread
Thread Starter
Forum
Replies
Last Post
hanz108
General GM Chat
2
04-01-2005 12:20 AM