GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat

GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat (https://www.gmforum.com/)
-   1992-1999 (https://www.gmforum.com/1992-1999-91/)
-   -   I belive I have found the ELC problem (https://www.gmforum.com/1992-1999-91/i-belive-i-have-found-elc-problem-211836/)

driverjohn2005 01-22-2005 03:15 PM

I belive I have found the ELC problem
 
I work on the ELC today. I have seemed to pinpoint the problem why the ELC dosen't work. The problem lies with the ELC solenoid that is found on the compressor head.

How, should I be able to buy a new solenoid? If so could someone give me a part number or link to it online? If not, how much with the whole bastard unit cost to replace? And do you have and sudgestions where to buy one? Online? Parts store? Dealer?

Thanks

OLBlueEyesBonne 01-22-2005 03:19 PM

Does anyone know if the front mounted compressor in Johns 1992 SSEi would be the same as the rear mounted compressor in my 1997 SSE parts car? I know the compressor in my parts car works -every time I hook a battery up to the car the compressor kicks in and levels the car.
If it is the same John has a deal available to him from me -how's $30 + shipping sound (if it comes to the point where you need to replace the pump)?

driverjohn2005 01-22-2005 03:21 PM

I'd have to money out to you today if that would work....

willwren 01-22-2005 03:54 PM

Stand by. I'm checking compatibility. These typically run 100 bones at the wrecker. I'll post the new AC Delco price too.

willwren 01-22-2005 04:05 PM

Not compatible, and the part numbers changed in a logical year.

92-95 22062531
96-99 22153324

driverjohn2005 01-22-2005 04:11 PM

damn....

willwren 01-22-2005 04:13 PM

John, I've had my compressor assembly apart twice for preventive maintenance. Have you considered something may be seized?

driverjohn2005 01-22-2005 05:01 PM

here's the deal. thats a possibility.

there is power going to the unit when I adjusted the sensor in the rear to simulate a load. But the power that is being sent does not start the ELC. But when I do put power to the ELC manualy the compressor kicks on and starts raising the car. In fact, the car is raised a little above the level position right now. I just left the wire connectors apart. If I hooked them back up the air pressure would be let out. :? :? :?

willwren 01-22-2005 08:18 PM

Missing o-ring between fittings? Seized restrictor valve or pressure valve? A little oil and closer inspection may be the medicine you need on that.

1997_LeSabre 01-23-2005 01:17 AM

I have a complete air leveling compressor (the one that mounts underhood, under where the air intake duct routes -- this provides air to the rear load leveling struts) from a 1992 LeSabre limited, with the air pressure solenoid. Tested and works. This should be the same part for your application, the LeSabre/Bonnevilles 92-99 used all the same suspension parts. PM me if you still need it. I have the ride height sensor that I pulled from the pass. rear control arm as well (I was planning on converting my 97 to ELC and then ended up getting KYB struts, which were so firm that the ELC w/ OE type rear struts would have been downgrading)

sonoma_zr2 02-05-2005 02:41 AM

Hey, I'm going to try to work on my elc today since it is so nice out. Are you saying the 97 ssei compressor is in the trunk? When I hit the button in the trunk I hear a click but that's it. The car sits level, but when people get in the back, it does not level. The only fuse I can find is in the engine compartment (30 amp) and it's good. Some specific suggestions for 97 ssei would be great.

willwren 02-05-2005 11:09 AM


Originally Posted by driverjohn2005
here's the deal. thats a possibility.

there is power going to the unit when I adjusted the sensor in the rear to simulate a load. But the power that is being sent does not start the ELC. But when I do put power to the ELC manualy the compressor kicks on and starts raising the car. In fact, the car is raised a little above the level position right now. I just left the wire connectors apart. If I hooked them back up the air pressure would be let out. :? :? :?

Remember that if the inflator is on, It prevents ELC. And it may be switching a ground, not power. You have to look at your FSM for that (DrJay still has mine).

So if your selector valve is bad, it may be part of the problem.

OLBlueEyesBonne 02-05-2005 11:42 AM


Originally Posted by sonoma_zr2
Hey, I'm going to try to work on my elc today since it is so nice out. Are you saying the 97 ssei compressor is in the trunk? When I hit the button in the trunk I hear a click but that's it. The car sits level, but when people get in the back, it does not level. The only fuse I can find is in the engine compartment (30 amp) and it's good. Some specific suggestions for 97 ssei would be great.

The pump is actually under the car, just behind the rr wheel. Gotta go at it from underneath. My pump in my 1998 SSE had been pretty inactive when it should have been active up until about 1 week ago. Now every time I pop the trunk and put something in or someone climbs in the back seat the pump kicks in for a a couple seconds and the back end comes up noticably, but not overdone. :D


All times are GMT -4. The time now is 04:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands